Online UV intensity display module's optical line monitoring equipment for UV lamps. Each unit provides personal UV lamp UV output of a relatively new indication for the user. The system consists of electronic modules for signal conditioning and UVISENSOR. UV intensity for each line front panel display module for display applications require. Holes can easily be drilled in the UV curing system provides the template to use control panel. UV intensity display and UVISENSOR online modules installed in the system for each lamp.
General introduction
Online UV intensity display module, and income tax when used in combination to create small sensors, optical tracking system, UV lamp design. Each unit provides personal UV lamp UV output shows a relatively new user. The system consists of electronic modules for signal conditioning and enterprise income tax for small sensors. UV intensity for each line front panel display module for display applications require. Holes can easily be drilled in the UV curing system provides the template to use control panel. On-line UV intensity display module and a sensor installed in the system for each lamp. System features include:

Analog output for input into the system of data collection, integrated control systems and distributed control systems, a standard signal.

Home
To obtain a good curing effect permanent, it is important to know when to perform maintenance of the UV system. Pure reflection is essential to effectively control your UV system and effective. If the light is merely a change in set time intervals can be replaced too early or too late. It is a waste of money, and products. The output of the human eye can not detect UV degradation, must rely on the bandwidth designed to monitor only the specified UV instruments. Online UV intensity display module will continue to follow a light exercise.

Operation
Tax on income from a small sensor signals are converted to voltage levels provided on the display. For 2 1 / 2 digit LED output proportionally representative of the initial calibration standards.

In addition, users can set the threshold at a low level, the lower limit for the monitor and the red light will warn the user against the threshold. Otherwise, the threshold of the green light to be visible. NO or NC relay is also available.

Configuration
24 V AC or DC power supply unit can be installed UV system on the control panel, making it easy to view for users. If space does not exist in the control panel of the UV system can be installed near the control panel.

The device consists of a buffer 0-10 volt output is directly proportional to the intensity of UV radiation. This simple line intensity UV output display interface module with programmable automatic recorders, computers or other devices, data collection, take 0-10 V analog input signal.

Installation

Online UV intensity display lcd module can be easily installed using the supplied template. The sensor is installed permanently monitor the UV light source, usually with 10 (3 m) cord. The satisfaction of several hardware projects, simplifying sensor installation. These sensors and arc (electrode) and microwave (Promise), mercury and mercury lamp equipped with a variety of system additives. The sensors are arranged in a 250 - 260nm wavelength range 280 - 320nm in the 320 - 390nm or 395 - 445nm range. Extended cable length of 10 to choose from.